Contact : 040 - 23712283, +91 9885564177
Email : cosmolaser@gmail.com     
Shrink Sleeves

COSMOLAZER SLEEVE FOR DRY CELL BATTERIES
Cosmolazer sleeve is widely used for insulation of Dry Cell Batteries. It is high quality sleeve which can meet in particular speed of automatic sleeve applicator machines. For quality stability , particular attention is given to chemical , thermal and electrical resistance. Cosmolazer Sleeve is used internally for making the battery cells leakproof. It is also used externally for twin or multiple pack of battery Cells.


ADVANTAGES :
Good insulation is imparted to Battery Cells.
Efficiency of Battery Cell is increased as leakage is prevented.
Protection against damage due to leakage of corrosive chemicals from Cell to expensive equipments in which Batteries are used.
Labels of Battery Cells are protected and lamination effect is given . The Pack is Pilfer Proof.
RANGE AVAILABLE:
Internal / External use –
UM1, UM2, UM3, UM3d (D, C AA & AAMJ) or R-20, R-14, R-6 & R-6 Heavy Duty
TOLERANCE :
Width +/- 0.5 mm Thickness +/- 0.01 mm.
SHRINK RATIO
Machine Direction -15 % +/-5% depending upon sizes .
Transverse Direction – 50% +/-3% depending upon sizes.
STANDARD LENGTH:
500 / 750 meters.
COSMOLAZER SLEEVE FOR CAPACITORS
Cosmolazer sleeve for Electrolytic Capacitors are used externally for necessary insulation to the capacitors. A variety of Cosmolazer sleeve from very small and narrow ones to broad ones are produced as per customer’s requirement. It is available in various colors.
ADVANTAGES:
Physical properties such as tensile strength, elongation at break , water absorption are guaranteed .
Electrical properties such as insulation are guaranteed. Improvement on impact resistance is made so that the sleeved condensers are not broken when fall from heights.
RANGE AVAILABLE:
Width 10 mm.to 150mm . Thickness 0.07 to 0.4 mm.
TOLERANCES:
Width +/-1 mm. Thickness +/- 0.02 mm.up to 0.20 mm.
+/-0.05 mm. above 0.25 mm
SHRINK RATIO :
Machine Direction - 5 %-8% & 8%-12% (as per customers)
Transverse Direction – 45%+/-5%
STANDARD LENGTH : 50 / 100 / 200 meters